Why have an epoxy garage ground? Common garage floors are just simple gray concrete. Above time, stains from grease, oils, and substances trigger basic grey concrete to grow to be an unsightly eyesore. Having an epoxy garage ground coating will give you several years of service, durability and will resist most stains as well as provide you with a fantastically, completed floor to maintain the value of your house.
The Most Common Epoxy Floor Coating Techniques
There are 3 widespread methods offered that will enhance your garage ground:
one. Epoxy & Polyurethane Sound Colour System
two. Epoxy Chipstone (partial vinyl chip broadcast) with Polyurethane Best Coat System
three. Epoxy Granitex (100% vinyl chip broadcast) with Polyurethane Prime Coat Program
Hold in brain that with these 3 epoxy programs, you have ‘good’, ‘better’ and ‘best’ types of epoxy garage ground methods.
The Great Technique
The epoxy polyurethane reliable color system will previous around 5-seven years, servicing free, but will call for a upkeep coat of pigmented polyurethane. This garage ground coating is usually a two-coat, slender movie method ranging in thickness from four-twenty mils. It is applied by roller or airless sprayer.
The Better Technique
The epoxy Chipstone program will last roughly 7-12 years, maintenance free of charge before needing a servicing coat of very clear polyurethane. This epoxy garage flooring method generally is made up of one pigmented primer coat of epoxy a pigmented color coat with a partial/light-weight broadcast of vinyl chips into the wet epoxy and a solitary coat of clear polyurethane for protection. The thickness is roughly 20-thirty mils.
The Very best Technique
The epoxy Granitex program can previous as prolonged as 12-15+ a long time, routine maintenance cost-free prior to needing a maintenance coat of polyurethane. This epoxy flooring coating is generally one particular pigmented primer coat a pigmented shade coat with a one hundred%/complete broadcast of vinyl chips and two coats of distinct polyurethane.
Planning
Appropriate floor planning is essential to the extended expression achievement of the installation. All surfaces to be coated should be cleaned of contaminants which may interfere with bonding. Concrete must be acid-etched, shot-blasted or diamond-floor to attain a profile similar to a hundred and twenty grit sandpaper. Following preparing, the concrete floor need to be inspected for holes and cracks. If holes or cracks are prevalent, then patchwork ought to be performed. Once preparation is total, installation is prepared to commence.
Installation of Granitex Epoxy Garage Floor Method:
1. Floor planning, patchwork and roll one coat of pigmented epoxy primer.
two. Following epoxy primer is dry, inspect, prep and roll one particular coat of pigmented epoxy above primed spot. Perform in epoxy floor coating or 12×12 sections at a time. While epoxy is damp, broadcast vinyl chips into moist epoxy. Be positive the area gets a hundred% protection. When all sections are totally protected, permit dry thoroughly.
3. Once all sections are dry, scrape, sweep and vacuum all extra Granitex vinyl chips from the floor. Utilize a thin coat of polyurethane to lock and lay vinyl chips down.
4. When the polyurethane is dry, utilize a next coat for a final prime coat. As an alternative, non-skid resin sand can be included to boost the slip resistance.
All epoxy garage flooring coatings can be very easily cleaned with gentle, liquid detergents then mopping, hosing or even “swiffering”. Grease, oils, and most chemical substances will not stain or take up into the epoxy coated flooring.