Queries And even Solutions With regards to LED Illumination – Exactly why LED Lighting?

one.Q: What are the positive aspects of LED Lights?

A: LED (Light-weight-Emitting Diode) Lights offer a multitude of benefits in excess of conventional gentle resources including reduced electricity intake, considerably more time life span, larger longevity, no ultraviolet and infrared radiation, minimal heat and scaled-down size.

2.Q: Can I directly replace my present lamps with LED lamps?

A: The LED Lights we supply are immediate substitute of incandescent, halogen and compact fluorescent lamps. This signifies that you do not have to do any alterations to your current system.

3.Q: Why need to I select LED lamps more than the less costly standard lamps?

A: Think about not only the first value of the lamp, but the true expense of light-weight, which involves the value of strength, substitute and maintenance charges.

– LED lights use considerably less strength. When set up at applications with extended perform hrs the saved electricity expense can carry the payback time to considerably less than 2 years.

– LED lights have much longer life, from 30,000 to 50,000 hrs. Envision that you do not have to adjust your lamps for the next 20 many years, specifically people challenging to reach light-weight fixtures.

For industrial applications extended lifestyle LED Lights imply reduced alternative costs and no far more group relamping. Taken into thing to consider diminished servicing expenses, the ROI (Return Of Investment decision) time for LED Lamps can be significantly less than 1 yr.

LED lamps generate quite minor heat as a result decreasing the energy employed by your air conditioner.

LED light has no dangerous UV (ultraviolet) and IR (infrared) rays.

LED lamps contain NO mercury like the fluorescent lamps. LED Lights are entirely protected for the Character and can be disposed as common squander.

four.Q: Will the Lower Voltage LED lamps perform with my existing transformer?

A: Low Voltage LED lamps are appropriate with magnetic transformers utilised with VAC lighting. If you have an digital transformer one particular LED lamp may possibly not work because of to its very low electrical power consumption. To work correctly most digital transformers demand a minimal load greater than the 3-watt used by our LED Place Lights. When connecting a couple of LED lamps to one particular transformer the load increases to a position exactly where the use of an electronic transformer is suitable.

five.Q: How does a LED perform?

A: The LED (Mild Emitting Diode) is an electronic light supply that works by the impact of electroluminescence. When a semiconductor diode is turned on electrons recombine with holes and power is discharged as light.

six.Q: What is the shade of the gentle from a LED?

The gentle shade of LED Lamps is calculated by Correlated Coloration Temperature (CCT) in Kelvins. Contemporary Substantial Electricity LEDs are coated with phosphor to transform light-weight from a blue LED to a broad spectrum white mild. Most widespread LED Gentle colours utilised are:

Warm White (Delicate White) – two,seven-hundred – three,300 K – the coloration of the gentle of a standard incandescent light bulb

Great White – about four,000 K – comparable to moonlight, xenon lamp mild colour

Daylight White > 5,000K – appears like flashlight, or common daylight.

seven.Q: What is Color Rendering Index?

A: The Colour Rendering Index (CRI) is measuring the capability of a light resource to simulate the hues of diverse objects precisely in comparison with the daylight. Even though there are critics of the subjective shade rendering in apply, the CRI is commonly used as a measurement of the quality of the light-weight. Larger CRI corresponds to etter high quality light, in scale from to a hundred.

8.Q: What is the CRI of LED light?

Microscope Lighting : Typically LED lamps rating above CRI eighty, which is greater than numerous other mild resources. LED Lamps with CRI earlier mentioned 90 are used for visible inspection duties.

9.Q: How efficient LED lamps are?

A: The output of mild resources is gentle and warmth. The greater the ratio light-weight to heat, the a lot more efficient the lamp. Modern substantial productive LED lights have performance of about 50 %, compared to regular incandescent lamp with 2-3% and fluorescent lamps with fifteen-twenty% efficiency.

LEDs naturally have directional gentle, this implies that the light-weight is less difficult to control with less losses. That provides an even greater gain in regards to LED lamps’ higher efficiency over all other present gentle resources.

10.Q: What is luminous efficacy?

A: The luminous efficacy is the light output for every device electricity input. It is calculated in lumen for each watt (lm/W). Presently commercially available LEDs have efficacy of a hundred thirty lm/W for amazing white and 107 lm/W for heat white light-weight (CREE XLamp MX-six). This is considerably higher in comparison to incandescent bulb that generates 15 lm/W and fluorescent lamp with 60-70 lm/W.

However, the efficacy of a one LED need to not be mixed with the efficacy of the lamp. Many makers and resellers point out the LED Lamp Gentle Output as sum of the output of the individual LEDs. This is not right because there are usually losses from gentle trapped inside of the lamp. The efficacy of a LED Light Lamp, also known as LED Light-weight Engine, can be elevated by much better layout and employing high high quality components.

eleven.Q: Is the lumen for every watt the only aspect I should contemplate when choosing a LED Gentle?

A: No, you need to contemplate also the CRI (top quality of mild) and your specific visual tastes. Some individuals like the much more yellow Heat (Comfortable) White gentle that resembles the mild from the incandescent lamp. Other favor the brighter and more true-colour rendering Cool / Daylight white.

12.Q: What is the life time of a LED Lamp?

A: When correctly set up and nicely ventilated, LED Lamps will extremely rarely burn off. Even so, the brightness of the LED gentle fade in excess of time, so LED Lamp’s life is calculated by two qualities – how significantly will it fade following 1,000 hrs of exploitation, and when the brightness will achieve 70% of the original value.

Good quality LED Lamps are rated at significantly less than 3% light output lessen for the initial one,000 several hours, and thirty,000 to 50,000 hrs for the 70% lessen, which is the standard for professional lights applications.

Once more, in contrast to traditional light sources, LED lights are exceptional regarding life time.

13.Q: Does the lifetime of a LED Mild Bulb shorten by repeated on/off switches?

A: In contrast to the fluorescent lamps, lifespan of LED Lamps is NOT motivated by frequent switching.

14.Q: What certifications your LED lights have?

A: All of our LED Lights are CE qualified and RoHS compliant. Most of the LED Lights we provide are also C UL US certified.

We will be happy to response your questions, please electronic mail us.

LotusLEDLights.com is a Canadian based mostly online retailer for higher good quality LED (Mild Emitting Diode) Lighting merchandise that are energy efficient and environmentally helpful. We focus in supplying LED Lights and LED Bulbs that are immediate substitute of the vitality squandering incandescent and halogen bulbs and the mercury made up of fluorescent lamps.